Battery Powered Hydraulic Cable Cutter
FEATURES:
- Flip-top head, rotatable
- Two-stage hydraulic system features fast feed and power stroke upon reaching counter pressure, saving time.
- 10000+ cycle service life.
- Press manual reset button to retract the ram when cutting is complete.
- Press manual reset button to retract the ram in case of error.
- Ram retracts to original position automatically when applied force exceeds rated capacity.
- Audible buzzer and red LED light in case of error.
- Quick motor stop for higher user safety.
- Powerful 18V Li-ion battery with low battery warning.
- Ergonomic 2-component grip area and balanced center of gravity.
- Sturdy plastic storage box.
Hand-Operated Hydraulic Cable Cutter
Cuts armoured AI and Cu cables and ACSR conductors Aluminum pump lever and housing result in low weight
FEATURES:
- Flip-top head, rotatable.
- Cuts armoured AI and Cu cable and ACSR conductors up to 40 mm.
- Aluminum pump lever and housing result in low weight.
- Built-in pressure relief value prevents overloading.
- Press manual release for fast retraction of the ram.
- Innovative 2-stage hydraulic system reduces operator fatigue and cycle time.
- Steel storage box.
Hydraulic Cable Cutter Heads
Cuts armoured AI and Cu cables
FEATURES:
- Lock pin type cutter head, blades can be replaced easily.
- Carry handle for easy shift in job sites.
- More safety with remote operation.
- Operated by hydraulic pump with rated pressure 700 bar.
Cuts armoured AI and Cu cables
FEATURES:
- Flip-top latch for easy insertion of cutting material.
- Fast cutting and more safety with remote operation.
- Blades can be easily replaced.
- Carry handle for easy shift in job sites.
- Operated by hydraulic pump with rated pressure 700 bar.
- Steel strong box.
Cuts armoured AI and Cu cables
FEATURES:
- Jaws slide open quickly to save time between cuts.
- Jaws are specially hardened.
- Lightweight and easy to use.
- Operated by hydraulic pump with rated pressure 700 bar.
- Steel strong box.
Hand Operated Hydraulic Crimping Tool
Aluminum pump lever and housing result in low weight Open C head, large crimping area up to 400 mm (square)
FEATURES:
- Open C crimping head, rotatable, large crimping area up to 400 mm (square).
- Light weight due to high quality aluminum housing.
- Thanks to the automatic retraction, poor crimps are avoided, more safety and shorter intervals between crimping operations.
- Manual release in case of need.
- The rotatable head permits to work in tight locations.
- Faster operation with less force thanks to the 2-stage hydraulic system.
- Sturdy steel storage box.
Hydraulic Crimping Heads
For use in indoor and outdoor power distribution and transmission projects, splicing fittings, overhead and underground conductors.
FEATURES:
- Yoke-type head design is solid and durable.
- Convenient handle makes handling and hoisting easier.
- Positive die locking mechanism holds dies firmly in place.
- Supplied with R2 ⅜ male coupler and dust cap.
- Requires an external hydraulic pump with rated oil pressure of 700 bar.
- Single action cylinder with spring return.
Hydraulic Knockout Punchers
Ideal tools for on-site hole punching in electric control panels and metal plates. Simple operation and quick punching. Flat, clean and burr-free cut.
Punching capacity: Stainless steel plate up to 1.6 mm thickness Mild steel plate up to 3.2 mm thickness
Punching range: 16-60 mm
FEATURES:
- Made of aluminum, the tool features lightweight and high portability.
- The head of AKP-8A is right-angled and rotating 360 degrees, which heater versatility in tight spaces.
- AKP-8E is perfect for fast, straight-on panel punching.
Manual Hydraulic Rebar Cutters
FEATURES:
- Cuts steel rebars 4-20 mm.
- Open head for easy insertion of rebars.
- Blades made of high strength and heat-treated steel.
- Robust and durable construction.
- Ram retracts by turning the release knob anticlockwise.
- Plastic carry case.
FEATURES:
- Cutting steel rebars 4-16 mm.
- Open head for easy insertion of rebars.
- Blades made of high strength and heat-treated steel.
- Robust and durable construction.
- Ram retracts by turning the release knob anticlockwise.
- Plastic carry case
Wire Rope Pulling Hoist
Versatile and portable hoist for lifting, pulling and tensioning purpose
Various applications include:
Tensioning cables, laying of large pipes, installation and adjustment of machines, loading and unloading heavy and bulky goods, heaping of forest products, obstacles removing etc.
FEATURES:
- Rated load : 20KN
- Pulling distance: 1300mm
- Diameter and length of wire rope: 7.0 x 1500 mm
- Weight : 3.8 kg
Bearing Fitting Tool Kit
FEATURES:
- Bore Diameter- 10 mm to 55 mm
- Impact Rings – 36 pieces
